Finished Hex Nuts
A standard nut with a thickness of .875 x diameter and a width across the flats of 1.5 x diameter.
| Product Description | Product Use | |
| Grade 2 | A low carbon nut widely used with non heat treated fasteners. Readily available in coarse and fine pitch. Finished as plain, zinc, or HDG. | |
| Grade 5 | The most common nut we sell, used with grade 5 or less bolts. Available in coarse and fine threads and typically zinc coated. | |
| Grade 8 | A case hardened nut used with hardened (150,000 psi min yield) fasteners. Coarse and fine threads. Typically available in plain or zinc finish. | |
| Stainless | For use with stainless fasteners in potentially corrosive applications. Available in 18-8 and 316 stainless (more corrosion resistant). Coarse and fine threads. | |
| Brass | A soft alloy nut composed of copper and zinc. Used in corrosive settings usually with brass fasteners. Coarse and fine thread available. | |
| Silicon Bronze | Harder nut than brass, an alloy of copper and tin. Used in corrosive applications. Coarse and fine thread. | |
| Nylon | A non metal nut used for its corrosion resistance and electrical insulating properties. Not known for it's strength, coarse thread. | |
| Aluminum | Lightweight, strong, and corrosion resistant nut used with aluminum fasteners. Available in coarse thread. | |
| Jam | 2/3 thickness of a standard nut used as a locking mechanism. Available in plain, zinc coated, 18-8, 316 stainless, & brass. Coarse and fine threads. | |
| L9/F911 | Sometimes called a grade 9 nut used with L9 bolts and two L9 washers. Very high tensile strength. Zinc coated in coarse and plain. | |
| Left Hand | These nuts thread onto left handed fasteners. Most fasteners are right hand threaded. Available in plain, zinc, stainless, coarse and fine thread. | |
| Metric | We carry metric nuts in class 8 (standard grade 5), class 10 (think standard grade 8), 18-8, 316 stainless, brass, jam and left hand pretty much like our standard line. These are available in coarse, fine, and even extra fine pitch. | |
| Machine Screw | These are standard nuts used on sizes smaller than 1/4. We carry in zinc, stainless, brass, and aluminum. Coarse and fine threads. |
